Track2 RailNet - Directions To

Genetti Hotel, Williamsport

MAP

From the Rt. I-180/220 Beltway travelling Eastbound

Take the Williamsport exit identified as Exit 26 Rt. 15 South, Lewisburg.

At the bottom of the ramp, the lanes split. Bear right to stay in the "Rt. 15 South, Lewisburg" lane, and bear right onto Via Bella.

Go 1 long block east to the 1st light which is William St. You will see Wegman's on the immediate left, and Perkins on the far left corner.

Turn left and go north on William thru the 1st light (Third St), to the 2nd light which is Fourth St.

You will see the Genetti Hotel on the NW corner of Fourth & William.

Continue north past the Genetti, and park in the Genetti's free lot in the rear.

From the Rt. I-180/220 Beltway travelling Westbound

Take the Williamsport exit identified as Exit 26 Rt. 15 South, Lewisburg

At the bottom of the ramp, go straight crossing Basin St, continue west thru the 1st light (Mulberry Street), straight thru 2nd light (which is Court St & the turnoff to Rt. 15 South), to the 3rd light which is William Street. You will see Perkins on the immediate right, and Wegman's on the far right corner.

Turn right and go north on William thru the 1st light (Third St), to the 2nd light which is Fourth St.

You will see the Genetti Hotel on the NW corner of Fourth & William.

Continue north past the Genetti, and park in the Genetti's free lot in the rear.

If Coming from the South on Rt 15 Northbound

After you cross the Market Street bridge over the Susquehanna River, proceed north thru the 1st light (Third St), and on to the 2nd light which is Fourth Street.

Turn left onto Fourth Street, and go west thru the 1st light (Pine St) to the 2nd light which is William St.

You will see the Genetti Hotel on the NW corner of Fourth & William.

Turn right onto William St, and then turn after you pass the Genetti, and park in the Genetti's free lot in the rear.

Use your BACK burtton to return to the page you came from, probably Track2 RailNet Shows or Club Contacts

This page modified 11/05a/2003 by [an error occurred while processing this directive]